80 Easythreed X1 Thingiverse Vers

80 Easythreed X1 Thingiverse Vers. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Download files and build them with your 3d printer, laser cutter, or cnc.

Beste I Got Forced To Add A Tiny Hot Bed To My Easythreed X1 3d Printer Now My Printing Experience Is Better 3dprinting

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

I made this by cobbling several designs together and.

Perhaps this will work for you. Do so at your own discretion. Any damage that results from you printing/using this object is solely your responsibility. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I do not advise printing both at once. Download files and build them with your 3d printer, laser cutter, or cnc. Print 1 at a time and use binder clips to hold the mag bed down.

I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Technically both parts fit on the print bed. Thingiverse is a universe of things.. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Do so at your own discretion.. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

I do not advise printing both at once. I made this by cobbling several designs together and. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Perhaps this will work for you.. Thingiverse is a universe of things.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!. Download files and build them with your 3d printer, laser cutter, or cnc. I do not advise printing both at once. The foot add on is for matching the height of printer to match nema motor. Thingiverse is a universe of things. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. This is an attachment to add a 40mm fan to the easythreed x1/x2. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …. Some issues i had with it are as follows:

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.. Perhaps this will work for you. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. This is an attachment to add a 40mm fan to the easythreed x1/x2. A sort of standalone mod if you will.

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to... Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Thingiverse is a universe of things. Recommended infill over than 98% and layer less than 0.2mm... Recommended infill over than 98% and layer less than 0.2mm.

This is an attachment to add a 40mm fan to the easythreed x1/x2. A sort of standalone mod if you will. Technically both parts fit on the print bed. I made this by cobbling several designs together and. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Recommended infill over than 98% and layer less than 0.2mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Technically both parts fit on the print bed.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!.. I made this by cobbling several designs together and. Download files and build them with your 3d printer, laser cutter, or cnc. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Recommended infill over than 98% and layer less than 0.2mm... The foot add on is for matching the height of printer to match nema motor.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company... This is an attachment to add a 40mm fan to the easythreed x1/x2. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs... Some issues i had with it are as follows:

I do not advise printing both at once. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I made this by cobbling several designs together and. Any damage that results from you printing/using this object is solely your responsibility. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. This is an attachment to add a 40mm fan to the easythreed x1/x2. Print 1 at a time and use binder clips to hold the mag bed down. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted... Recommended infill over than 98% and layer less than 0.2mm. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … This is an attachment to add a 40mm fan to the easythreed x1/x2. Do so at your own discretion. Any damage that results from you printing/using this object is solely your responsibility. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! The foot add on is for matching the height of printer to match nema motor.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. The foot add on is for matching the height of printer to match nema motor.

This is an attachment to add a 40mm fan to the easythreed x1/x2. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Recommended infill over than 98% and layer less than 0.2mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

Print 1 at a time and use binder clips to hold the mag bed down... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. The foot add on is for matching the height of printer to match nema motor. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Any damage that results from you printing/using this object is solely your responsibility. This is an attachment to add a 40mm fan to the easythreed x1/x2. Some issues i had with it are as follows: Print 1 at a time and use binder clips to hold the mag bed down. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Print 1 at a time and use binder clips to hold the mag bed down.

This is an attachment to add a 40mm fan to the easythreed x1/x2. I do not advise printing both at once. Some issues i had with it are as follows: Perhaps this will work for you. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Any damage that results from you printing/using this object is solely your responsibility. Download files and build them with your 3d printer, laser cutter, or cnc. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Do so at your own discretion.. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.

I made this by cobbling several designs together and. A sort of standalone mod if you will. Perhaps this will work for you. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Download files and build them with your 3d printer, laser cutter, or cnc.. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. A sort of standalone mod if you will. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Download files and build them with your 3d printer, laser cutter, or cnc. Do so at your own discretion.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Any damage that results from you printing/using this object is solely your responsibility. I do not advise printing both at once. Technically both parts fit on the print bed. Recommended infill over than 98% and layer less than 0.2mm. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Technically both parts fit on the print bed.

Recommended infill over than 98% and layer less than 0.2mm. . Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

Do so at your own discretion. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it ….. The foot add on is for matching the height of printer to match nema motor.

The foot add on is for matching the height of printer to match nema motor. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Any damage that results from you printing/using this object is solely your responsibility. A sort of standalone mod if you will. Download files and build them with your 3d printer, laser cutter, or cnc. The foot add on is for matching the height of printer to match nema motor.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Download files and build them with your 3d printer, laser cutter, or cnc. A sort of standalone mod if you will.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. . I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Any damage that results from you printing/using this object is solely your responsibility. Thingiverse is a universe of things.

Recommended infill over than 98% and layer less than 0.2mm. I made this by cobbling several designs together and. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Do so at your own discretion. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. The foot add on is for matching the height of printer to match nema motor.. I do not advise printing both at once.

The foot add on is for matching the height of printer to match nema motor. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Technically both parts fit on the print bed.. I made this by cobbling several designs together and.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Thingiverse is a universe of things. Any damage that results from you printing/using this object is solely your responsibility. Technically both parts fit on the print bed. This is an attachment to add a 40mm fan to the easythreed x1/x2. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.. Technically both parts fit on the print bed.

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to... Perhaps this will work for you. Some issues i had with it are as follows: The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Recommended infill over than 98% and layer less than 0.2mm. Do so at your own discretion. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I do not advise printing both at once. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.. Some issues i had with it are as follows:

I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Print 1 at a time and use binder clips to hold the mag bed down. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Some issues i had with it are as follows: I made this by cobbling several designs together and. Do so at your own discretion. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to... Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

Technically both parts fit on the print bed. Recommended infill over than 98% and layer less than 0.2mm. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I made this by cobbling several designs together and. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Technically both parts fit on the print bed. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. Do so at your own discretion.

This is an attachment to add a 40mm fan to the easythreed x1/x2... Some issues i had with it are as follows: Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Thingiverse is a universe of things. Do so at your own discretion.

I do not advise printing both at once... I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …. Technically both parts fit on the print bed.

Download files and build them with your 3d printer, laser cutter, or cnc. Thingiverse is a universe of things. This is an attachment to add a 40mm fan to the easythreed x1/x2. Download files and build them with your 3d printer, laser cutter, or cnc... This is an attachment to add a 40mm fan to the easythreed x1/x2.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... The foot add on is for matching the height of printer to match nema motor. Perhaps this will work for you. This is an attachment to add a 40mm fan to the easythreed x1/x2. A sort of standalone mod if you will. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Download files and build them with your 3d printer, laser cutter, or cnc.

I made this by cobbling several designs together and.. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Perhaps this will work for you. Any damage that results from you printing/using this object is solely your responsibility. This is an attachment to add a 40mm fan to the easythreed x1/x2. Some issues i had with it are as follows:

Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. This is an attachment to add a 40mm fan to the easythreed x1/x2. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I do not advise printing both at once. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. The foot add on is for matching the height of printer to match nema motor. Do so at your own discretion. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Recommended infill over than 98% and layer less than 0.2mm. Download files and build them with your 3d printer, laser cutter, or cnc. Download files and build them with your 3d printer, laser cutter, or cnc.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. This is an attachment to add a 40mm fan to the easythreed x1/x2. I made this by cobbling several designs together and. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Thingiverse is a universe of things.. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

Print 1 at a time and use binder clips to hold the mag bed down. I made this by cobbling several designs together and.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!. Some issues i had with it are as follows: Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Print 1 at a time and use binder clips to hold the mag bed down. Thingiverse is a universe of things. I made this by cobbling several designs together and. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Recommended infill over than 98% and layer less than 0.2mm. This is an attachment to add a 40mm fan to the easythreed x1/x2. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to.

Technically both parts fit on the print bed. Print 1 at a time and use binder clips to hold the mag bed down. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.. I do not advise printing both at once.

Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I made this by cobbling several designs together and. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Technically both parts fit on the print bed. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

Print 1 at a time and use binder clips to hold the mag bed down. . Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.

I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Some issues i had with it are as follows: Perhaps this will work for you. Thingiverse is a universe of things. Download files and build them with your 3d printer, laser cutter, or cnc. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Recommended infill over than 98% and layer less than 0.2mm. A sort of standalone mod if you will. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Some issues i had with it are as follows:

I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. The foot add on is for matching the height of printer to match nema motor. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

A sort of standalone mod if you will. I do not advise printing both at once. Any damage that results from you printing/using this object is solely your responsibility. Print 1 at a time and use binder clips to hold the mag bed down. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Do so at your own discretion. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted... Some issues i had with it are as follows:

Do so at your own discretion... Download files and build them with your 3d printer, laser cutter, or cnc.

Download files and build them with your 3d printer, laser cutter, or cnc.. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Download files and build them with your 3d printer, laser cutter, or cnc. Any damage that results from you printing/using this object is solely your responsibility. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Technically both parts fit on the print bed. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself... Download files and build them with your 3d printer, laser cutter, or cnc.

This is an attachment to add a 40mm fan to the easythreed x1/x2.. .. I made this by cobbling several designs together and.

Download files and build them with your 3d printer, laser cutter, or cnc... The foot add on is for matching the height of printer to match nema motor. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. I made this by cobbling several designs together and. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Do so at your own discretion. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

Recommended infill over than 98% and layer less than 0.2mm.. Print 1 at a time and use binder clips to hold the mag bed down. Some issues i had with it are as follows: Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Thingiverse is a universe of things.

I do not advise printing both at once... A sort of standalone mod if you will. Some issues i had with it are as follows: Do so at your own discretion. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

A sort of standalone mod if you will. Recommended infill over than 98% and layer less than 0.2mm. The foot add on is for matching the height of printer to match nema motor. Any damage that results from you printing/using this object is solely your responsibility. A sort of standalone mod if you will. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Download files and build them with your 3d printer, laser cutter, or cnc... Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself.

This is an attachment to add a 40mm fan to the easythreed x1/x2. . Print 1 at a time and use binder clips to hold the mag bed down.

A sort of standalone mod if you will... . I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Print 1 at a time and use binder clips to hold the mag bed down. Technically both parts fit on the print bed. Some issues i had with it are as follows: I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

Download files and build them with your 3d printer, laser cutter, or cnc.. Perhaps this will work for you. Recommended infill over than 98% and layer less than 0.2mm. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Do so at your own discretion. I made this by cobbling several designs together and. Do so at your own discretion.

Thingiverse is a universe of things. .. Perhaps this will work for you.

Recommended infill over than 98% and layer less than 0.2mm.. Any damage that results from you printing/using this object is solely your responsibility. The foot add on is for matching the height of printer to match nema motor. Recommended infill over than 98% and layer less than 0.2mm. Print 1 at a time and use binder clips to hold the mag bed down. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. The foot add on is for matching the height of printer to match nema motor. Thingiverse is a universe of things. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Some issues i had with it are as follows:

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm.. Thingiverse is a universe of things. I do not advise printing both at once. The foot add on is for matching the height of printer to match nema motor. This is an attachment to add a 40mm fan to the easythreed x1/x2. Technically both parts fit on the print bed. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs.

I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Any damage that results from you printing/using this object is solely your responsibility. The foot add on is for matching the height of printer to match nema motor. Perhaps this will work for you. Technically both parts fit on the print bed. Do so at your own discretion. Print 1 at a time and use binder clips to hold the mag bed down. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Thingiverse is a universe of things. I do not advise printing both at once. Download files and build them with your 3d printer, laser cutter, or cnc.

I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Print 1 at a time and use binder clips to hold the mag bed down. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Do so at your own discretion. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

Technically both parts fit on the print bed. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Print 1 at a time and use binder clips to hold the mag bed down. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Any damage that results from you printing/using this object is solely your responsibility. Do so at your own discretion. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm... I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it …

Technically both parts fit on the print bed. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. Some issues i had with it are as follows: The foot add on is for matching the height of printer to match nema motor. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!

Print 1 at a time and use binder clips to hold the mag bed down. Any damage that results from you printing/using this object is solely your responsibility. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. I do not advise printing both at once. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Print 1 at a time and use binder clips to hold the mag bed down. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.. I printed it out on my x1 and was not happy with the quality so i converted the gcode back to stl and removed all the supports so i could print it in any orientation on any of my printers that i wanted.

Do so at your own discretion... Recommended infill over than 98% and layer less than 0.2mm. I do not advise printing both at once.. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm.

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Technically both parts fit on the print bed. This is an attachment to add a 40mm fan to the easythreed x1/x2. Thingiverse is a universe of things. Thingiverse is a universe of things.

The foot add on is for matching the height of printer to match nema motor... Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. Download files and build them with your 3d printer, laser cutter, or cnc. Some issues i had with it are as follows: I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. A sort of standalone mod if you will. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Do so at your own discretion.

This is an attachment to add a 40mm fan to the easythreed x1/x2. I moved the hot end fan that comes mounted in the printer head to become a part cooling fan since it … Technically both parts fit on the print bed. Do so at your own discretion. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. Some issues i had with it are as follows: Recommended infill over than 98% and layer less than 0.2mm... I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company.

Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! . I do not advise printing both at once.

The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. I do not advise printing both at once. A sort of standalone mod if you will. The foot add on is for matching the height of printer to match nema motor. Download files and build them with your 3d printer, laser cutter, or cnc. Do so at your own discretion. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Just added v4 of this design which now has a zip tie mount for the x axis cable designed this because i found most designs available for this purpose did not suit my needs. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench!.. Any damage that results from you printing/using this object is solely your responsibility.

This is an attachment to add a 40mm fan to the easythreed x1/x2... Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Technically both parts fit on the print bed. This is an attachment to add a 40mm fan to the easythreed x1/x2. Print 1 at a time and use binder clips to hold the mag bed down. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm. Technically both parts fit on the print bed.

Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. This is an attachment to add a 40mm fan to the easythreed x1/x2. I made this by cobbling several designs together and. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Print 1 at a time and use binder clips to hold the mag bed down.

I made this by cobbling several designs together and. The foot add on is for matching the height of printer to match nema motor. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. A sort of standalone mod if you will. Any damage that results from you printing/using this object is solely your responsibility. Recommended infill over than 98% and layer less than 0.2mm. Nicer spool holder for the easythreed x1 i also split it (files top and bot) in case you really really want to print the spool holder on the x1 itself. The smallest 12v fan i could source locally was 40mm x 40mm x 10mm... Print 1 at a time and use binder clips to hold the mag bed down.

This is an attachment to add a 40mm fan to the easythreed x1/x2. I desperately wanted to add a part cooling fan to my printer but couldn't easily get my hands on the tiny 25mm x 25mm x 7mm fan recommended by the company. The foot add on is for matching the height of printer to match nema motor. Thingiverse is a universe of things. Perhaps this will work for you. Print four of these little legs and place the control box under the printer in order to save some space on your desk or workbench! Additionally prepare to mount nema17 motor mount 8 x m3 bolt 4 x m3 nut belt over than 460mm. I suggest gluing a little bit of foam or a piece of yoga mat beneath the legs in order to absorb some of the vibrations this little beast gives off :) i am using these on my easythreed x1, however, from what i've been able to. Download files and build them with your 3d printer, laser cutter, or cnc. Some issues i had with it are as follows: